The ABS Square Foundation Pads
For use on all mobile and manufactured homes, including
HUD approved homes and modular housing.
Patent #5503500 and other Patents Pending

Oval Foundation Pads - Multi-Pad Configurations

Back to ABS Foundation Pads general information

Square Pad Size Max. Load Capacity (lbs.)
16" x 16" 5,333 Installation Instructions Order Online
13" x 26" 6,400 Installation Instructions Order Online
18.5" x 18.5" 7,100 Installation Instructions Order Online
20" x 20" 8,250* Installation Instructions Order Online
24" x 24" NEW! 8,000* Installation Instructions Order Online
*Concrete blocks are only rated at 8,000 pounds. 8,000 pounds and higher must be double blocked.
     
ALABAMA ONLY: The 16" x 16", 18.5" x 18.5", 20" x 20", 17.5 x 22.5, and 17.5 x 25.5 are the only pads approved in the state of Alabama and must not have more than 3/8" defection. See chart below for details on correct installation in Alabama.

Alabama Pier Spacing Chart for
single section or multi-section home
2,000 lbs. soil.

Example (left): 16' x 18' Section
Note: FOR ALABAMA ONLY: When setting in soil capacities over 1,000 lbs. psf, the block (CMU) configuration shown in this drawing is required on the 20" x 20" and the 18.5" x 18.5" pads.
Alabama Pad Size Pier Spacing
16" x 16" 5'6" Installation Instructions Order Online
18.5" x 18.5" 7'0" Installation Instructions Order Online
17" x 22" 7'6" Installation Instructions Order Online
17.5" x 25.5" 8'0" Installation Instructions Order Online
20" x 20" 8'0" Installation Instructions Order Online

Oval Foundation Pads - Multi-Pad Configurations

Back to ABS Foundation Pads general information

OLIVER TECHNOLOGIES INCORPORATED
467 Swan Avenue - P.O. Box 9 - Hohenwald, TN 38462
1-800-284-7437
931-796-4555 / Fax 931-796-8811
www.olivertechnologies.com